good quality sous vide ball wholesale for oxygen concentrators

آخرین محصولات

خشک کننده های آلومینا فعال

XINTAO زئولیت 13X غربال مولکولی آبگیری گاز طبیعی

پودر الک مولکولی

غربال مولکولی کربن

اطلاعات محصول
بازخورد

Polypropylene Plastic Balls

Polypropene is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes.

Polypropylene is mostly hard and flexible, particularly when copolymerized is with ethylene. Polypropylene is economical, and can be translucent when uncolored but is not as readily made transparent as polystyrene, acrylic, or certain other plastics. It is often opaque or colored using pigments. Polypropylene has great resistance to fatigue and a melting point of 171ºC (340ºF)

Material	Polypropylene (PP)
Size	1mm-80mm
Grade	G0-G3 (±0.01-0.05mm)
Density	Around: 0.85g/cm3
Advantage	Has good resistance, chemical resistance, low density (density less than water), low water absorption, the highest melting point of the thermoplastic with excellent electrical insulator and low dielectric coefficient, often used for floating capacity requirements, withblood transfusion, level calibration indicator.
Application	PP ball is mainly used for transfusion, level calibration indicator.

POM Delrin plastic balls

POM, characterized by its high strength, hardness, and stiffness to ~40ºC., is intrinsically opaque white, but it is available in all colors. POM has a density of 1.410-1.420 g/cm³.

POM homopolymer is a semicrystalline polymer (75-85% crystalline) with a melting point of 175ºCelsius. The POM copolymer has a slightly lower melting point of 162-173ºCelsius.

Material	Delrin
Size	1mm-80mm
Grade	G0-G3 (±0.01-0.05mm)
Density	Around: 1.4g/cm3
Advantage	it is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption
Application	POM ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus.

PA66 Nylon plastic balls

Material	PA66( Nylon)
Size	1mm-100mm
Grade	G0-G3 (±0.01-0.05mm)
Density	Around: 1.1g/cm3
Advantage	The nylon has preferably the alkali metal, to adapt to the neutral characteristics of petroleum products and all kinds of chemical products.
Application	Used in check valve, light load, the knob pull switch, low-cost, but also for better flexibility requirements, high hardness aspects

PTFE Plastic balls

Material	Teflon Balls-PTFE
Size	1mm-320mm
Grade	G0-G3 (±0.01-0.05mm)
Density	2.1–2.3 g/cm³
Advantage	Based frictionless known material having excellent chemical stability, resistance to corrosion, sealing, high lubricity non-tackiness, electrical insulation and good anti-aging Stamina. Continuous use temperature range of -180 ° C to 250 ° C. PTFE (Teflon ®), ball so excellent frictionless known to most corrosive resistant possessed electrically insulating material
Application	Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument.

People can be set assured that this product will be not subject to problems like color fading and paint flaking off. The product has been exported to more than 100 countries. The product has been regarded as a means of enhancing people's complexion, beautifying the appearance, and improving confidence. The product has been exported to more than 100 countries.

z******i

The material of sous vide ball allows ping pong balls sous vide to make it ping pong balls sous vide. Shuyang's wide range of led stage light products are precisely engineered by our professionals quality material and advanced technology

w******o

sous vide ball produced by are mainly characterized by their sous vide ball. All the lighting products of Shuyang undergo strict quality control procedure of testing in our R&D division, before launching in the market

t******z

sous vide ball is made of high quality ping pong balls sous vide with perfect performance such as ping pong balls sous vide. Our lighting devices are one of the most preferred selections of clients owing to its application specific design and dimensional accuracy

c******b

Materials of sous vide ball is actually quite sous vide ball. Various kinds of products can fit into different applications

l******m

Our ping pong balls sous vide have a wide range of material category, taking different processes. In addition to our standard range of products, Shuyang also provides custom made stage lighting solutions as per client requirements

d******e

This product can work long hours. It can work all the time and will only stop working when maintenance or inspection is required. Mini 90w led moving head light is Shuyang's largest selling sharpy light

پیام محصول

*نام

تلفن

*پست الکترونیک

*محتوا

ارسال استعلام به صورت رایگان!

اگر در مورد کارخانه، محصول، موک، قیمت، اطلاعات تحویل، سؤالی دارید،

لطفاً آدرس ایمیل خود را بگذارید، ما مشخصات جزئیات را برای شما ارسال خواهیم کرد.

با ما تماس بگیرید

پست الکترونیک

صادرات@xt988.com

نقشه سایت

ارسال استعلام

Good quality sous vide ball wholesale for oxygen concentrators

PTFE Plastic balls